Single And Multi-Point Calibration Point Calibration - Jadever JCL Series User Manual

changing and key
PRINT/LO
to modify the value (or via numeric keys). Press key to modify the value (or via numeric keys). Press key
shift the windows.
SET15
16)
On: display the last weight when powering on display the last weight when powering on again
Off: do not display the last weight when powering on again do not display the last weight when powering on again
SET16
17)
Qty.ck: start amount checking
Wt.ck: start weighing checking start weighing checking
SET17
18)
G N/SET
press key
displaying OK.
6. Single and Multi-point Calibration
Note: Before calibration, please set the capacity first. The unit used in calibration is the one Before calibration, please set the capacity first. The unit used in calibration is the one Before calibration, please set the capacity first. The unit used in calibration is the one
that has been set before. During the calibration procedure, LONG press that has been set before. During the calibration procedure, LONG press
return to normal weighing mode without saving. return to normal weighing mode without saving.
Here we take 3kg/10g as an example /10g as an example
TARE/
1 . Press and hold
not release it till the window displa
2 . With no load on the weighing
TARE/
press to start zero point calibration. to start zero point calibration.
3 . Wait till the window displays the first calibration till the window displays the first calibration value.
Note: The first calibration value is default. If the value The first calibration value is default. If the value
has been changed, the default value is 1/3 of full load. has been changed, the default value is 1/3 of full load.
If you need to change the value, do as the following: Press key If you need to change the value, do as the following: Press key
value setting. Press key
M-/HI PRINT/LO
or
TARE/
/MR
or or
weight memory parameter: on，off weight memory parameter:
the kinds of checking: Qty.ck，Wt.ck the kinds of checking:
checking
parameter initialization parameter
M+/SAVE
then key then key
Calibration
while powering on. while powering on. Do
isplays CAL"
―
pan,
TARE/
/MR /MR
or
to modify the value (or via numeric keys). Press to modify the value (or via numeric keys). Press key
(II)
to shift the figures. Press key to shift the figures. Press key
to start initialization. It is finished when to start initialization. It is finished when
to move leftwards or rightwards. leftwards or rightwards. Press key
M-/HI
M+/SAVE M+/SAVE
to save and
ZERO/ESC ZERO/ESC
G N/SET G N/SET
to enter the
key
o r
to