Single Point Calibration; Linear Calibration - Jadever JCL User Manual

2) Here we take JCL-15K as an example.

6-1 Single Point Calibration

1) Press and hold key
the scale.
2) Input 11 with numeric keys
3) Again press key
calibration modes.
4) Wait till ― ‖ flashes, press numeric key
of full load, 2/3 of full load and full load. E.g., options for JCL-15K are 5, 10 and 15(kg).Put the
corresponding weights on the weighing pan.
·
5) Press key to confirm.
6) The calibration procedure is completed with a ―
remove all the weights.
SMPL
7) Press key

6-2 Linear Calibration

1) Press and hold key
the scale.
2) Again press key
calibration mode, with ―
weight screen.
3) Wait till ― ‖ appears and flashes on weight
window, put weights of 1/3 of full load on (e.g. 15k
model, 1/3 of full load is 5kg.)
4) Wait till ― ‖ appears and flashes on total weight screen, put weights of 2/3 of full load
on (for 15k model, 2/3 of full load is 10kg)
5) Wait till‖ ‖ appears and flashes on total weight screen, put weights of full load on (for
15k model, full load is 15kg)
6) The calibration Procedure is finished with a symbol of ―
away the weights.
TARE
7) Press key
SMPL
while powering on
SMPL
to enter the zero point
,
to save and then press key
TARE
while powering on
TARE
to enter zero point
‖ flashing on the
to return to weighing mode.
1
to select calibration weight .Options are 1/3
‖ flashing on the weight screen. Now,
ZERO
to return to the weighing mode.
JCL
Vetek Weighing AB
‖ flashing, and then take
9