Basic Counting - Jadever JCL Series User Manual

mode without saving.
Place the sample on the weighing pan. Place the sample on the weighing pan.
HI indication appears, when the item on the weighing pan is greater than the upper limit HI indication appears, when the item on the weighing pan is
OK indication appears, when the item on the weighing pan is between upper and lower limits. OK indication appears, when the item on the weighing pan is between upper and lower limits. OK indication appears, when the item on the weighing pan is between upper and lower limits.
LO indication appears, when the item on the weighing pan is smaller than lower limit LO indication appears, when the item on the weighing pan is smaller than lower limit LO indication appears, when the item on the weighing pan is smaller than lower limit
Note: the item on the weighing pan should be more than or equal to 20e. Note: the item on the weighing pan should be more

7-4 Basic Counting

7-4-1 Entering a Known Unit Weight and Unit weight Entering a Known Unit Weight and Unit weight Memory
1) Under the weighing mode, use the numeric Under the weighing mode, use the numeric
keys together with key
value, and then press
2）Put the items on the weighing pan , the Put the items on the weighing pan , the
scale starts counting.
Note: Symbol ― ‖ points at ―UW‖ when
Unit weight Calling-out
UWS/ITEM
1) Press
2) Input the number of unit weight. Press key Input the number of unit weight. Press key
PRINT/LO
to modify the value (or via numeric keys) to modify the value (or via numeric keys)
M+/SAVE
3) Press key
ZERO/ESC
key to exit and return to weighing mode. to exit and return to weighing
7-4-2 Sample Counting and Sample Counting and ACAL
Sample Counting
1) Place samples onto the weighing Place samples onto the weighing pan
(or into a tared container) and input the quantity (or into a tared container) and input the quantity
with numeric keys, then press key with numeric keys, then press key
The unit weight is calculated, with The unit weight is calculated, with
at ―ACAI‖
.
Note:
● The larger the sample size, the more The larger the sample size, the more accurate unit weight.
"·‖
to inpu input unit weight
UWS
.
hen entered unit weight is lower than 4/5 of sca
key. The window displays as shown on The window displays as shown on the right.
to confirm called-out weight and return to the weighing mode. Press to confirm called out weight and return to the weighing mode. Press
SMPL
.
Symbol ― ‖ pointing
(II)
greater than the upper limit
than or equal to 20e.
TARE/
/MR
or to shift and key to shift and key
f scale division.
M-/HI
or