Table of Contents
Advertisement
When ― ‖ appears in the upper left corner of the weight window, the battery power
appears in the upper left corner of the weight window, the battery power
appears in the upper left corner of the weight window, the battery power
requires recharging. The charge lamp
(which takes about 8 hours). Disconnect
A full charged battery can operate the scale for approximately 65 hrs with backlight, 80hrs
A full charged battery can operate the scale for approximately 65 hrs
without backlight.
Note: Battery is to replaced only by an authorized service dealer .Risk of explosion can occur
Note: Battery is to replaced only by an authorized service dealer .Risk of explosion can occur
Note: Battery is to replaced only by an authorized service dealer .Risk of explosion can occur
if replaced with the wrong type or connected improperly
if replaced with the wrong type or connected improperly
5. Setting Mode
5-1 Function Setting
G N/SET
1) Press
G N/SET
Or long press
/MR
2) Press key
G N/SET
3) Press key
/MR
4) Press key
M+/SAVE
5) Press key
ZERO/ESC
Press key
ZERO/ESC
6) Press key
5-2 Parameters
SET00
1)
SET01
2)
Options are On, OFF, and AUTO
= Backlight
= No backlight
= Auto-on with items greater
ever(ever=the backlight lasts forever with more than 9d placed on the pan) when
ever(ever=the backlight lasts forever with more than 9d placed on the pan) when it is stable.
ever(ever=the backlight lasts forever with more than 9d placed on the pan) when
SET02
3)
Options are off, 5min, 10min, 30min, and 60min.
Options are off, 5min, 10min, 30min, and 60min.
Off : close auto-off function
lamp turns green from red when the recharging
Disconnect the scale from power supply when it
key while powering on
key while powerin
key in the weighing mode to enter parameter setting.
key in the weighing mode to enter parameter setting.
key in the weighing mode to enter parameter setting.
TARE/
or
to circle the parameters
to enter the selected parameter.
to enter the selected
TARE/
or
to circle the items of present parameter.
to save after changing and return to parameters choosing. While
to save after changing and return to parameters choosing. While
to save after changing and return to parameters choosing. While
to return without saving.
to return without
again to return to weighing mode.
again to return to weighing
internal code
internal code checking
backlight modes shifting
backlight modes shifting
greater than 9d placed on the pan. Auto-off within 2s,4s,6s....,
auto-off time
off time setting
(II)
recharging is completed
it is fully charged.
with backlight, 80hrs
2s,4s,6s...., 20s,
Hide quick links:
Advertisement
Table of Contents
