5. Press key
6. Press key
7-6 Set AD gain of remote platform
1. Under normal weighing mode, press
2. Press
for 3 seconds to enter the advanced parameter setting.
3. Press key
4. Press
or
5. Press
to save and return to normal weighing mode.
7-7 Switch between Main scale and Remote platform
1. Press
to switch between main scale mode and sub channel mode (remote platform)
2. The
flashed in the Weight Window.
3. When
flashing disappear, means that you are in the sub channel mode (remote
platform). Now the remote platform could be used
4. To change back to the main scale mode just press
Window.
5. When
flashing disappear, means that the scale have returned back to main scale
mode.
8. Operation
8-1 Zero-point
Press
if you do not see "
and wait till
to save the settings and return to weighing mode
or
to select parameter A-07
to select the AD gain. (Options: 1/2/4/8/16/32/64)
" but
is displayed in the Total Count window.
for 3 seconds to enter the basic parameter setting.
, and
symbol "
" appears
will flash in the Weight
JCAII 8
V03