Operation; Weighing; Tare & Preset Tare - Jadever JCL Series User Manual

M+/SAVE
to save.
4 . Put the corresponding weight on the weighing Put the corresponding weight on the weighing pan,
TARE/
and then press
Note: After the first point calibration, the window can display the weight value. If no need After the first point calibration, the window can display the weight value. If no need After the first point calibration, the window can display the weight value. If no need
for the other point calibration, move to Step 6 to finish the calibration procedure. for the other point calibration, move to Step 6 to finish the calibration procedure. for the other point calibration, move to Step 6 to finish the calibration procedure.
5 . Add another weight 500g to the current weight. The window Add another weight 500g to the current weight. The window
will show the total weights value. otal weights value. Press
Repeat this step to complete the calibrations of on3, on4 and on5. Repeat this step to complete the calibrations of on3, on4 and on5.
ZERO/ESC
6 . Press
It will return to normal weighing mode. It will return to normal weighing
Note: the window displays
return to the normal weighing.

7 . Operation

7-1 Weighing

Place item to be weighed on the scale. The Weight Place item to be weighed on the scale. The Weight
window shown is 1.00kg, Gross Weight. window shown is 1.00kg, Gross Weight.
7-2 Tare & Preset Tare
Tare
When weighing a sample that must be held in a When weighing a sample that must be held in a container, taring stores the container weight
into memory.
1) Under the weighing mode, place the container on the scale. Under the weighing mode, place the container on the scale.
TARE
Press the key
The symbol appears and the window displays as shown on the right symbol appears and the window displays as shown on the
2） Place the item into the container.
Then the window displays the net weight. Then the window displays the net weight.
3） Clear the pan. The window displays the taring Clear the pan. The window displays the taring weight
That is the weight of container.
4) To cancel tare action, clear the pan and press cancel tare action, clear the pan and press
ZERO/ESC.
or
to complete the first point to complete the first point calibration.
TARE/
to save. A After the window displays ―
automatically when on5 is finished. It will be saved and
to complete tare action. to complete tare
container.
container.
(II)
to complete.
‖,
on5 is finished. It will be saved and
container, taring stores the container weight
TARE/
right