Power Supply - Jadever JCL Series User Manual

SMPL
key Short press enters the sampling mode. Long press closes ACAI after
3)
sampling. And shift Units when capacity setting.
G N/SET
4) key Shift the displays of Gross weight and Net weight after tare. Long press to
enter parameters setting. And turn on or off check weighing when entering HI, LO, OK
setting.
UWS/ITEM
5) key Find out the unit weight in memory or save the unit weight reset again.
Inputs the indicated unit weight via numeric keys and press it to start counting function.
M+/SAVE
6) key Accumulate the records of counting or weighing. Save the changing
parameter. Set the capacity and resolution.
M-/HI
7) key Clear the input figures. Set the value of HI. Enable the blinking figure plus
one when inputting the figures.
ZERO/ESC
8) key Zeros the display (within 2% of max.capacity) or cancels Tare action.
Exit from the setting or without saving.
9) /MR
Recalls and displays the total Accumulation data (weight, total count
key
and number of weightments ) and the first 10 records in details. Circle the choices
in the setting. Make the blinking spot shift leftwards when inputting the figures.
PRINT/LO
key Press the key to print when printing manually is selected. Set the LO
10)
value. Enable the blinking figure decrease one when inputting the figures.
TARE/
11)
key Inputs the weight of the object on the weighing pan as a Tare value ;
Inputs the indicated value entered via the numeric keys as a pre-set Tare value ; cancel
Display
tare action.
shift rightwards when inputting the figures.

4-3 Power Supply

Power supply
Please verify the local AC power source and switch the two-stage switch to the proper place
before plugging into the power outlet.
Alternative power supply
1) AC 110V/220V (AC±10%)
2) (6V/4A) internal rechargeable battery
Power Consumption
About 300mW (without backlight)
About 380 mW (with backlight)
Low battery warning
(II)
the first 10 records in detail. Make the blinking spot
rightwards
5