Keyboard - Jadever JCL Series User Manual

5) Leveler
6) HI Lamp (ON) Indicating parameter item Indicating parameter item
sounds. (See 5. Function Setting, setting buzz sounds) sounds. (See 5. Function Setting, setting buzz
OK Lamp (ON) -- Indicating parameter item
sounds.
LOW Lamp (ON)—Indicating parameter
7) ―PRESET TARE" Symbol ― ‖ p
numeric keys.
8) ―NET" Net weight--Gross weigh
PRESET TARE action is done.
9) ―STABLE" Stable indication, Sy
is in stable condition.
10) ―ACAI" Symbol ― ‖ points a
recalculated.
11) ―M+" Symbol ― ‖ points at "M+
12) "UW" Under entering a kno
entered unit weight is lower than 4/5 of scale division. Unit weight is too small for ensuring entered unit weight is lower than 4/5 of scale
accurate quantity calculations.
13) ―SMPL" Under the sample
calculated unit weight is lower than 4/5 of scale division or the quantity of sample is calculated unit weight is lower than 4/5 of scale division or the quantity of sample is less than calculated unit weight is lower than 4/5 of scale division or the quantity of sample is
10 pieces.
14) "UNIT WEIGHT" Unit Weight Window
number of weighments.
15) "TOTAL COUNT" Total count window
weighing pan, or accumulated piece count value. weighing pan, or accumulated piece count
16) "WEIGHT" Weight Window--Displays weight of object on weighing pan, or accumulated
weight value.

4-2-2 Keyboard

0 ~9
1) numeric keys Enters specific values for tare; unit weight and other data entries. numeric keys Enters specific values for tare; unit weight and other data numeric keys Enters specific values for tare; unit weight and other data
2) ● key Decimal point
Indicating parameter item
parameter item
points at "PRESET TARE" when Tare value
ht minus Tare. Symbol ― ‖ points at "NET" w
ymbol ―
at "ACAI" when the average unit weight is
+" when scale is in accumulation mode.
own unit weight mode, Symbol ― ‖ points
ple counting mode, Symbol ―
Unit Weight Window --Displays the average unit weight value, or
count window –Displays the calculated number of pieces on the
Displays weight of object on weighing pan, or accumulated Displays weight of object on weighing pan, or accumulated
(II)
is selected when setting buzz
or is selected when setting buzz is selected when setting
is selected when setting buzz sounds. is selected when setting buzz
‖ appears at the top of "STAB
division. Unit weight is too small for ensuring
‖ points at
Displays the average unit weight value, or
Displays the calculated number of pieces on the
buzz
entered via
when TARE or
BLE" when scale
calculated
is or
s at ―UW" when
at "SMPL" when