Removing The Transducers; Figure 4-15: Removing The Eight Socket Head Cap Screws Securing A Transducer; Figure 4-16: Separating A Transducer Assembly From The Towfish Housing - Klein 4900 Series Operation And Maintenance Manual

Disassembling and Reassembling the Towfish
4.3.3 Removing the
Transducers
To remove the transducers:
Perform Steps 1 through 4
1.
in "Disassembling the
Towfish" on page 4-3.
Using the 4-mm hex key,
2.
remove the eight socket
head cap screws securing
either transducer assembly
to the towfish housing.
Carefully separate the
3.
transducer assembly from
the towfish housing.
Figure 4-15:
Removing the Eight Socket Head
Cap Screws Securing a Transducer Assembly
Figure 4-16:
Separating a Transducer
Assembly from the Towfish Housing
4-11