Miscellaneous Settings; Button Control - Panasonic S-3650PU3E Technical Data & Service Manual

8-2-1-11. Miscellaneous Settings

A variety of changes can be made to settings, depending on the indoor unit being used.
Operation mode indicator, time display (24 hour, AM/PM), heating maximum temperature
These settings are saved in nonvolatile memory in the remote controller, so even when its batteries are changed, the settings
do not have to be made again.
First check the display of the remote controller when the unit is stopped and then make any desired settings.
How to Operate
While holding down the buttons below, the remote controller's display changes every time
•
Whatever is being displayed when you release
•
Setting Item
Remote controller
operation mode
display setting when
is pressed
Clock display setting
Max possible
temperature setting
in the Heat mode

8-2-1-12. Button Control

You can enable or disable the following buttons for some indoor units.
nanoe™ X, ECONAVI, Ventilation, Energy saving
1. Press the button for desired setting for 4 seconds or longer.
• You can toggle between enable and disable each time you press
the button for 4 seconds or longer.
• " " is displayed when you press a disabled button, and the
function cannot be used.
Buttons
nanoeX
ECONAVI
8
Operation Button
Press while
pressing
Press while
pressing
Press while
pressing
Setting content
Enabling or disabling the button for nanoe™ X.
Enabling or disabling the button for ECONAVI.
Enabling or disabling the button for ventilation.
Enabling or disabling the button for energy saving.
is set.
Remote Controller
Setting Content
Heat Pump
(with Auto)
Heat Pump
(without Auto)
Dedicated air
conditioner
24-hour
AM/PM
Maximum heating
temperature range
is 26 °C – 30 °C
8-2-1-10
is pressed.
Display
1