Simple Settings Function - Panasonic S-3650PU3E Technical Data & Service Manual

7-1. Simple Settings Function

• This allows the filter lifetime, operating mode
priority change, central control address, and other
settings to be made for an individual or group-
control indoor unit to which the remote controller
used for simple settings is connected.
When simple settings mode is engaged, operation
stops at the individual or group-control indoor unit
to which the remote controller for simple settings is
connected.
<Procedure of CZ-RTC4>
1 Press and hold the
simultaneously for 4 seconds or longer.
2 " ", unit No. "
of group control), item code "
data " " are displayed blinking on the remote
controller LCD display (Fig. 7-1). At this time, the
indoor unit fan (or all indoor unit fans in the case of
group control) begins operating.
3 If group control is in effect, press the
select the address (unit No.) of the indoor unit to set.
At this time, the fan at the indoor unit begins operating.
*If unit No. "
will be made for all indoor units.
4 Press the temperature setting
select the item code to change.
5 Press the timer time
desired setting data.
*For item codes and setting data, see the following
page.
6 Press the
and remains lit, and setting is completed.)
7 Press the
controller display.
7
and buttons
" (or " " in the case
," and settings
" is displayed, the same setting
/ buttons to
/ buttons to select the
button. (The display stops blinking
button to return to normal remote
4
5
button and
7-1
A
CZ-RTC4
7 1 6
Fig. 7-1
2
3