Panasonic S-3650PU3E Technical Data & Service Manual page 135

Auto External Static Pressure Setting Operation
6. Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD
display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4. Test run
Sel. Page [
7. Press the or
If you wish to see the next screen instantly, press the
or button.
Select "4. Test run" on the LCD display and press the
button.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4. Test run
Sel. Page [
The "Test run" screen appears on the LCD display.
Test run
Test run
Change [
Change the display from OFF to ON by pressing the
or button. Then press the
Test run
Test run
Change [
The "Maintenance func" screen appears on the LCD
display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4. Test run
Sel. Page [
8. Press the button. "TEST" will be displayed on the
LCD display.
TEST
[ ] START
, and buttons
20:30 (THU)
] Confirm
button to see each menu.
20:30 (THU)
] Confirm
20:30 (THU)
OFF
] Confirm
button.
20:30 (THU)
ON
] Confirm
20:30 (THU)
] Confirm
20:30 (THU)
9. Press the
Test run setting mode screen appears on the LCD display.
TEST
MO
COOL
10. Set the operation mode to "
speed mode to
or
Then press the
TEST
MODE
The fan motor will be activated, the auto external static
pressure setting operation and setting-check operation will
be performed for about 3 to 30 minutes.
The fan speed will change automatically while these
operations are in progress. When these operations
completed, "TEST" will be disappeared from the LCD
display.
MODE
NOTE:
The auto external static pressure setting operation
and setting-check operation will not be performed
unless "
SPEED)" have been selected.
11. Press the
The LCD display will be returned to the initial screen.
[
NOTE:
Failure to set this parameter may result in
decreased airflow and condensation.
1-11-1-2-16
button. Test run will be started.
20:30 (THU)
DE
FAN SPEED
FLAP
(MODE FAN)" and fan
"
(FAN SPEED)" by pressing the
button or or
button.
20:30 (THU)
FAN SPEED
FAN
FLAP
20:30 (THU)
FAN SPEED
FAN
FLAP
(MODE FAN)" and "
button.
20:30 (THU)
] START
1
button.
(FAN