Rwru3, Cz-Rwru3W - Panasonic S-3650PU3E Technical Data & Service Manual

8-3-2. CZ-RWRU3, CZ-RWRU3W
1. Accessories
Supplied accessories
Operating
C a l m p r e
Instructions
(1)
(1)
2. Settings
Setting for Receiver
Check the settings of the [S003] DIP switch on the
receiver's PCB.
* Remove the cover from the receiver when
performing the PCB settings.
* When using the infrared remote controller and
the wired remote controller in combination,
set the wired remote controller to [Main].
Setting Address Switches
When more than 1 receiver is installed in the same room, setting addresses prevents interference.
For how to change addresses of wireless (infrared) remote controllers, see "Matching Up Addresses" of wireless (infrared)
remote controllers on page 8-2-1-8.
To change the receiver's address, remove the cover from the receiver's PCB and set No.1 to No.3 of the [003] DIP switch
on PCB.
Remote
Address
Controller
Address
Display ALL
Receipt is
Position of
possible at
the receiver's
all of the
address
address
switch
positions
8
SM830256-00_Single_欧州小筺体 TD&SM.indb
Installation
Instructions
(1)
Address Address
1 2
1 2 3 4 1 2 3 4
16
PCB cover
Receiver PCB
Address Address Address
3 4
1 2 3 4 1 2 3 4 1 2 3 4
8-3-3
All set at OFF
when shipped
Screw
from the factory.
ON
Main/Sub selector
1 2 3 4
switch for remote
controllers (4)*
OFF: Main
ON: Sub
Set its address
(1) to (3)
Address
ON/OFF
States
5 6
OFF ON
1 2 3 4
16/12/28 13:40:31