8-14. Miscellaneous Settings
A variety of changes can be made to settings, depending on the indoor unit being used.
Wind Direction (flap) indicator, operation mode indicator, time display (24 hour, AM/PM), Heat Max Temp
For information about the flap function, refer to the users' manual of the unit being used.
(These settings are saved in nonvolatile memory in the remote control, so even when its batteries are changed,
the settings do not have to be made again.)
First check the display of the remote control when the unit is stopped and then make any desired settings.
How to Operate
While holding down the buttons below, every time
•
Whatever is being displayed when you release
•
Setting Item
Remote control flap
display setting for
when
is pressed
Remote control
operation mode
display setting when
is pressed
Clock display setting
Max possible temperature
setting in the Heat mode
8
is pressed the remote control's display changes.
is set.
Operation Button
Models with movable flaps
Press
Swing only models
while pressing
Models w/o lamps
Heat Pump (with Auto)
Press
Heat Pump (without Auto)
while pressing
Dedicated air conditioner
24 Hour
Press
while pressing
AM/PM
Press
Maximum heating temperature
range is 26 °C – 30 °C
while pressing
Setting Content
8-12
Remote Control Display
None