Optional Controller (Remote Controller); Names And Operations - Panasonic S-3650PU3E Technical Data & Service Manual

8-2. Optional Controller (Remote Controller)

Wireless (Infrared) Remote Controller
1 remote controller can control a group of up to 8 indoor units. (See page 8-2-1-6)

8-2-1-1. Names and Operations

REMOTE CONTROLLER
Displays the operation status.
1. Operation Display
(The figure shows all the statuses.)
2. Start/Stop
Pressing this button once starts and
button pressing again stops the operation.
3. Fan speed Press to change the fan speed.
button
Press to change the flap
4. Flap button
direction.
Press to set ECONAVI.
5. ECONAVI button
ECONAVI
Press to set nanoe™ X.
6. nanoe™ X button
nanoeX
Use this when connected to an
7. Ventilation button
aftermarket fan.
8. Clock button Use this to set the clock.
9. Cover
Press at the top center and then
slide down.
10. Transmitter
11. Temperature
setting buttons setting 1 °C at a time.
setting 1 °C at a time.
12. Mode Select
Press to switch the operation mode.
button
13. Energy saving
Press to enable or disable
energy saving.
button
CZ-RWS3
raises the temperature
lowers the temperature
8-2-1-1
14. Filter button
Press to turn off the filter lamp on
the receiver.
15. Timer setting
buttons
Use for operating with a timer.
16. RC reset button Use this button after changing the
batteries.
RC
RESET
Press to set addresses.
17. RC address
button
RC
ADR
1
2
3
4
5
6
7
8
9
From this page, the names of remote controller's
buttons will be indicated with the above illustrations.
E.g.: Start/Stop button
/ / / / /
10
11
12
13
14
15
16
17
8 8