Panasonic S-3650PU3E Technical Data & Service Manual page 192

2-3-1-6-3. Auto Address Setting Using the Remote Controller
Auto Address Setting from the High-spec Wired Remote Controller (CZ-RTC5B)
(1) Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD display.
2
( ) 2 Press the
If you wish to see the next screen instantly, press the
or
Select "9. Auto address" on the LCD display and press
the button.
Maintenance func
9. Auto address
10. Set elec. consumption
11. Set touch key
12. Check touch key
Sel.
(3) The "Auto address" screen appears on the
LCD display.
Change the "Code no." to "A1" by pressing
the or
Auto address
Code no.
A1
Sel.
Auto Address Setting* from the Remote Controller (CZ-RTC4)
* Auto address setting in Cooling mode cannot be done from the remote controller.
N OTE
Selecting each refrigerant system individually for auto address setting
Auto address setting for each system : Item code "A1"
(1) Press the remote controller timer time
button at the same time.
(Press and hold for 4 seconds or longer.)
(2) Next, press either the temperature setting
(Check that the item code is "A1".)
(3) Use either the
auto address setting.
(4) Then press the
(Auto address setting for one refrigerant system begins.)
(When auto address setting for one system is completed,
the system returns to normal stopped status.)
<Approximately 4 – 5 minutes is required.>
(During auto address setting, "
the remote controller.
This message disappears when auto address setting is completed.)
(5) Repeat the same steps to perform auto address setting for each successive system.
, and
or button to see each menu.
button.
20:30 (THU)
Page [ ] Confirm
button.
20:30 (THU)
O/D unit no.
1
Next
button to set the system No. to perform
button.
" is displayed on
buttons
(4)
Select the "O/D unit no." by pressing the
or
Select one of the "O/D unit no." for auto address
by pressing the
Approximately 10 minutes are required.
When auto address setting is completed, the units
return to normal stopped status.
button and
/ button.
2-3-1-11
[ ] START
button.
or button.
(2)
(1) (4)
20:30 (THU)
CZ-RTC5B
(4)
(3)
CZ-RTC4