Mode Settings - Panasonic U-10MF1E8 Service Manual

6. Mode Settings

■ Setting mode 1
<Operating procedure>
➀
Press and hold the
(VENTILATION) button simultaneously for 4
seconds or longer.
➁
Use the temperature setting
buttons to change the item code. The item codes
and setting data are shown in the table below.
➂
Use the timer time
the setting data.
To confirm the changed setting data, press the
button.
(At this time, "
lit.)
➃
During this mode, "
The outdoor unit address display section displays
"ALL," the item code number (DN value in the
table), and the setting data (8 digits).
3
(The setting data is displayed in 8 digits. The
display changes between the first 4 digits (Fig.
and the last 4 digits (Fig.
digits are displayed, the bottom dot of the colon is
lit.)
➄
To exit the setting mode, press the
button.
DN
Snowfall sensor usage
Outdoor unit fan Quiet
mode
Energy saving mode
Energy saving operation
plug
Demand 1 current
Demand 2 current
High static pressure mode
(CHECK) button and
and
and buttons to change
" stops blinking and remains
" is displayed, blinking.
B
). When the first 4
(CHECK)
Parameter
0 = Sensor input not present. Control is performed.
1 = Sensor input present. Control is performed.
2 = Sensor input not present. Control is not performed.
3 = Sensor input present. Control is not performed.
0 = Disabled
2 = Quiet mode 2
4 = Quiet mode 4
0 = None
1 = Discharge temp. control only (Mode 3)
2 = Demand only (Mode 2)
3 = Discharge temp. control + Demand (Mode 1)
0 = Independent
1 = All indoor units linked
0 = 0% 1 = 40 ... 4 = 70 7 = 100 8 = 120
9 = 140 10 = 160 11 = 200 12 = –1 (no limit)
0 = 0% 1 = 40 ... 4 = 70 7 = 100 8 = 120
9 = 140 10 = 160 11 = 200 12 = –1 (no limit)
0 = Disabled
* Charge when the external static pressure is increased to over 30 Pa.
Outdoor Unit Maintenance Remote Controller
A
Display of fi rst 4 digits
5
1
B
Display of last 4 digits
A
)
5
1
A
B
and
(Example shows display of 0000 0001.)
Description
1 = Quiet mode 1
3 = Quiet mode 3
6 = High static pressure mode
3 - 12
3-WAY SYSTEM
3
3
are displayed alternately.
2
2