Usb Troubleshooting; Usb 2.0 Required; Try Another Usb Cable; Using A Powered Usb 2.0 Hub - Native Instruments TRAKTOR AUDIO 10 Manual

• As any other USB device, the driver installs exactly for one USB port. If you connect
the TRAKTOR AUDIO 10 to another port, a standard Windows® dialog opens in which
you can install the driver to that port. If you have previously installed the driver on your
computer once, Windows® will find the right drivers itself once that you start the driver
installation procedure. If you cancel the installation procedure, the driver will not be
installed and the interface will not work on that port.
• If you do not know whether drivers were installed correctly, it is advisable to start the
setup program of the TRAKTOR AUDIO 10 again (see chapter 3). If the setup program
states that it will first uninstall the drivers, you already have installed the drivers on your
computer. In this case you can connect the device to any other USB port and Windows®
will find the right driver when installing the TRAKTOR AUDIO 10 on another USB port.
Mac OS® X
On Mac OS® X, open the System Preferences for the Native Instruments USB Audio Con-
trol Panel icon. Open the control panel to see whether the device is detected.
• If the device is not detected, values will appear grayed out. If the Native Instruments
USB Audio Control Panel icon is missing here, the driver is probably not installed.
• If the driver is not installed, you can install it as described in chapter 3.
• If the driver is not recognized, check your USB 2.0 connection as described in chapter 8.3.
8.3 USB Troubleshooting
If you experience problems caused by the USB connection between the TRAKTOR AU-
DIO 10 and your computer, check the following chapters first; several possible sources for
USB issues are covered here.

8.3.1 USB 2.0 required

The TRAKTOR AUDIO 10 is a USB 2.0 interface and will not work at all on a USB 1.0/1.1 port.

8.3.2 Try another USB cable

A bad USB cable can be responsible for audio dropouts and other connectivity problems.
It is recommended that you try using a different cable if you experience difficulties. Also,
make sure to use a cable bearing the official USB logo.
8.3.3 Using a powered USB 2.0 hub
Connect the TRAKTOR AUDIO 10 to a USB 2.0 port directly on your computer. In certain
situations, a powered USB hub may also work (e.g., if you are having problems connecting
your TRAKTOR AUDIO 10 to an onboard USB port).
70 – TRAKTOR AUDIO 10 – Manual