Miscellaneous Setups; Connecting Headphones - Native Instruments TRAKTOR AUDIO 10 Manual

7.3 Miscellaneous Setups
7.3.1 Connecting Headphones
7.7 TRAKTOR AUDIO 10 in a setup with a computer and headphones.
! !
Make sure the TRAKTOR AUDIO 10 software is installed correctly, the interface is
connected to your computer, and the power supply is plugged in as described in chapter
3. Also make sure to have the soundcard set up as your computer's main audio output
device (chapter 4) before you proceed.
To use your TRAKTOR AUDIO 10 in a setup with a computer and headphones:
1. Plug the 1/4" TRS jack of your headphones into the PHONES socket on the TA10's
front panel. Turn the Headphone Volume Control knob (VOLUME) to the left-end stop
to set the volume to minimum.
TRAKTOR AUDIO 10 – Manual – 63