Native Instruments TRAKTOR AUDIO 10 Manual page 43

To use your TRAKTOR AUDIO 10 in an analog DJing setup with a turntable and a mixer:
1.
Connect the OUT channel of a port on the rear panel of the TA10 to a Line/CD input
channel on your mixer. Use a stereo RCA (phono) cable.
2. Set the channel volume on your mixer to minimum.
3. Connect the IN channel of the same port on the TA10 to your turntable with a stereo
RCA (phono) cable.
42 – TRAKTOR AUDIO 10 – Manual