Mac Os® X; Using The Traktor Audio 10 As An Audio Output Device With Music Software; Using The Traktor Audio 10 With Dj Software - Native Instruments TRAKTOR AUDIO 10 Manual

4.1.3 Mac OS® X
1. Open the
System Preferences
your screen.
2. In the Hardware category (second row from top), select Sound.
3. In the Sound control panel, select the Output tab.
4. Choose TRAKTOR AUDIO 10 from the list of available soundcards.
5. Close the panel.
→ TRAKTOR AUDIO 10 is now selected as the default audio output device.
4.2 Using the TRAKTOR AUDIO 10 as an Audio Output Device with
Music Software
Before using the TRAKTOR AUDIO 10 with music production or DJ software, you will need
to set it up as the software's audio output device. Most music production and DJ programs
provide direct access to the soundcard properties in the audio and MIDI setup section of
their preferences dialog. Please refer to the documentation of your music production or DJ
software for information on how to configure audio and MIDI interfaces.
4.3 Using the TRAKTOR AUDIO 10 with DJ Software
For instructions on how to utilize TRAKTOR DJ software for mixing purposes with a dedi-
cated hardware audio interface, please see the documentation of your TRAKTOR software.
For the TRAKTOR AUDIO 10 to work in a digital DJing context (with timecode media), it is
important that the input channels on the relevant ports are set up for receiving timecode,
i.e., THRU mode is deactivated and the channels are set to PHONO or LINE, depending on
whether you use timecode vinyl or CD decks sending timecode. See chapter 6.1.2 / 6.2.1
for instructions on how to configure the port settings. See chapter 7.2 for instructions on
how to set up the TA10 to work with DJ software.
22 – TRAKTOR AUDIO 10 – Manual
under the gray Apple Icon menu in the top left corner of