Connecting A Cd Deck For Analog Djing - Native Instruments TRAKTOR AUDIO 10 Manual

7.1.2 Connecting a CD Deck for Analog DJing
7.2 TRAKTOR AUDIO 10 in an analog DJing setup with a CD deck and a mixer.
! !
Make sure the power supply is plugged in (see chapter 3.3) before you proceed.
! !
The example in this chapter shows how to use the soundcard for analog DJing in stand-alone
mode (without employing a computer). Note, however, that the relevant ports have to be set
to LINE and THRU (see soundcard's top panel LEDs) in order for stand-alone mode to work.
The port configuration takes place in the Startup tab of the Control Panel's Channel Setup
For instructions on configuring the ports, please read chapter 6.1.2 / 6.2.1.
Note that you can combine analog with digital DJing in one setup, i.e., mixing in a
% !
CD deck output on one port while playing music from your computer on another. For
instructions on configuring the ports, please read chapter 6.1.2 / 6.2.1.
44 – TRAKTOR AUDIO 10 – Manual
page.