Native Instruments TRAKTOR AUDIO 10 Manual page 28

• MAIN IN and OUT: IN and OUT light green when there is incoming/outgoing audio signal on
the front panel's MAIN port. The IN LED lights red when the incoming signal is clip-
ping (too loud).
• MIDI: IN and OUT light green when a MIDI connection is detected and active. The LED
blinks upon incoming/outgoing MIDI data.
• DC: Lights orange when the 9 volt DC power adapter is plugged in. The power supply
needs to be plugged in at all times.
• USB: Lights green when the USB port is connected to a computer. A blinking green,
however, indicates a USB connection problem.
• PHONES: IN lights orange when monitoring the incoming signal of the MAIN IN channel,
which is located on the front panel of the soundcard. OUT lights orange when monitor-
ing the outgoing signal of the MAIN OUT channel. Press the SOURCE button next to the
headphone socket to toggle between the two monitoring modes.
TRAKTOR AUDIO 10 – Manual – 27