Native Instruments TRAKTOR AUDIO 10 Manual page 39

Temporary and Default Settings (Current and Startup)
6.13 The Channel Setup
The
Channel Setup page holds two tabs for configuring the ports A through D on your TRAK-
TOR AUDIO 10: the Current
• On initial start-up, the Current settings reflect the settings from the Startup settings tab
(which holds the default settings). You can temporarily change these settings and they
remain changed until the device becomes unplugged from the power source.
Unplugging the USB cable does not affect the Current
% !
• The Startup settings tab holds the port settings that the soundcard defaults to when
the device is initially plugged in with DC power. To apply changes here, you first have
to click on the lock symbol in the Click the lock to make
changes by clicking the Save button.
38 – TRAKTOR AUDIO 10 – Manual
page with the Current settings tab selected.
settings and the Startup settings tab:
settings.
changes dialog box. Confirm your