Basic Configuration; Selecting The Traktor Audio 10 As Your System's Default Audio Output Device; Windows® Xp; Windows® Vista®, Windows® 7 - Native Instruments TRAKTOR AUDIO 10 Manual

4 Basic Configuration
In order for the TRAKTOR AUDIO 10 to operate as your computer's default audio output
device, you will need to select it within the system's audio preferences. Find the relevant
instructions in chapter 4.1.
For information on using the TRAKTOR AUDIO 10 as your music software's default audio
output device, see chapter 4.2.
For information on using the TA10 with TRAKTOR DJ or other DJ software, see chapter 4.3.
4.1 Selecting the TRAKTOR AUDIO 10 as Your System's Default
Audio Output Device
In the following sections, you will learn how to set up the TRAKTOR AUDIO 10 as your
computer's default audio output device.
4.1.1 Windows® XP
1. Open Start > Control Panel > Hardware and Sound > Sound.
2. In the Sounds and Audio Devices
3. From the
Default Device drop-down list of options, select TRAKTOR AUDIO 10.
4. Click OK to confirm your selection and close the window.
→ TRAKTOR AUDIO 10 is now selected as the default audio output device.
4.1.2 Windows® Vista®, Windows® 7
1. Open Start > Control Panel > Hardware and Sound > Sound.
2. In the Sound control panel, select the Playback tab.
3.
Choose from one of TRAKTOR AUDIO 10's pair of outputs (Ch A, Out 1|2 or Ch B, Out
3|4) that you want to set as default by clicking the corresponding entry.
4. Click Set Default.
5.
Click OK to confirm your selection and close the window.
→ TRAKTOR AUDIO 10 is now selected as the default audio output device.
Properties window, select the Audio tab.
TRAKTOR AUDIO 10 – Manual – 21