Audio Configuration - Native Instruments TRAKTOR AUDIO 10 Manual

6.14 The Channel Setup page with the Startup settings tab selected.
By default, the soundcard is set to Phono
% !
for mixing analog signal from turntables, and Line
D for mixing analog signal from CD decks.
! !
If you want to use the TRAKTOR AUDIO 10 in stand-alone mode (without employing a
computer), the Startup settings have to be set to Direct Thru
input channels forward the signal to the output channels. With
will not hear any output on the relevant ports when running the soundcard in stand-alone
mode.
6.2.2 Audio Configuration
To open the Audio MIDI Setup utility:
▶
Go to Applications > Utilities > Audio MIDI Setup.
→
The Audio MIDI Setup utility will pop up in a window, entitled Audio
The left half of the window displays the different hardware and software in and outs
installed on the computer. If not selected already, click on Traktor Audio
TRAKTOR AUDIO 10 device.
with activated Direct Thru
with activated Thru mode
on the relevant ports so the
Direct
TRAKTOR AUDIO 10 – Manual – 39
mode on ports A and B
on ports C an
Thru deactivated, you
Devices.
10 to utilize the