Native Instruments TRAKTOR AUDIO 10 Manual page 33

• Input Sens:
•
Select Phono for when connecting a turntable to the port (no matter if digital mixing
with timecode vinyl or analog mixing with records; both need phono amplification).
•
Select Line for when connecting a CD deck to the port (or other line level equipment
such as a synthesizer, an MP3 player, a tapedeck, etc.).
Each port A through D may be used by one of the following devices: a turntable with ana-
log records, a turntable with timecode vinyl, a CD deck, a CD with a timecode disc, or any
other line device.
By default, the soundcard is set to Phono
% !
for mixing analog signal from turntables, and Line
D for mixing analog signal from CD decks.
Temporary and Default Settings (Current and Startup)
6.5 The Channel Setup with the Current settings tab selected.
The Channel Setup page holds two tabs for configuring the ports A through D on your TRAK-
TOR AUDIO 10: the Current
• On initial start-up, the Current settings reflect the settings from the Startup settings tab
(which holds the default settings). You can temporarily change these settings and they
remain changed until the device becomes unplugged from the power source.
U nplugging the USB cable does not affect the Current
% !
• The Startup settings tab holds the port settings that the soundcard defaults to when
the device is initially plugged in with DC power. To apply changes here, you first have
to click on the lock symbol in the Click the lock to make
changes by clicking the Save button.
32 – TRAKTOR AUDIO 10 – Manual
with activated
settings and the Startup settings tab:
mode on ports A and B
Direct Thru
with activated Thru mode
settings.
changes dialog box. Confirm your
on ports C an