Native Instruments TRAKTOR AUDIO 10 Manual page 34

6.6 The Channel Setup with the Startup settings tab selected.
By default, the soundcard is set to Phono
% !
for mixing analog signal from turntables, and Line
D for mixing analog signal from CD decks.
! !
If you want to use the TRAKTOR AUDIO 10 in stand-alone mode (without employing a
computer), the Startup settings have to be set to Direct Thru
input channels forward the signal to the output channels. With
you will not hear any output on the relevant ports when running the soundcard in stand-
alone mode.
with activated Direct Thru
with activated Thru mode
on the relevant ports so the
Direct
TRAKTOR AUDIO 10 – Manual – 33
mode on ports A and B
on ports C an
Thru deactivated,