Native Instruments TRAKTOR AUDIO 10 Manual page 20

3. Connect the plug at the end of the power supply's cable to the power supply connector
on the rear panel of your TA10.
4. Connect the TA10 to a USB 2.0 port on your computer using the USB cable included
in the package.
→ After connecting the soundcard to your computer, the USB drivers will be installed
on your computer automatically and the TRAKTOR AUDIO 10 soundcard should be
ready to use straight away. Proceed with registration chapter 3.4. For Windows® XP, see
separate section below.
TRAKTOR AUDIO 10 – Manual – 19