Traveling Forward And Reverse - JLG E300AJ Operation And Safety Manual

Traveling Forward and Reverse

FOOTSWITCH MUST BE DEPRESSED PRIOR TO ACTIVATING ANY FUNCTION, OTHER-
WISE FUNCTION WILL NOT OPERATE.
1.
At Platform Controls, pull out Emergency
Stop switch and activate footswitch.
2.
Position Drive controller to Forward or
Reverse as desired.
This machine is equipped with a Drive Orientation Indicator. The
yellow light on the platform control console indicates that the
boom is swung beyond the rear drive tires and the machine may
Drive/Steer in the opposite direction from the movement of the
controls. If the indicator is illuminated, operate the Drive function
in the following manner:
31215000
SECTION 4 - MACHINE OPERATION
1. Match the black and
white direction arrows
on both platform con-
trol panel and the chas-
sis to determine the
direction the machine
will travel.
2. Push and release the Drive Orientation Over-
ride switch. Within 3 seconds, slowly move
the Drive control toward the arrow matching
the intended direction of machine travel. The
indicator light will flash during the 3 second
interval until the drive function is selected.
4-9