JLG E300AJ Operation And Safety Manual page 43

SECTION 3 - MACHINE CONTROLS AND INDICATORS
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANTS TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
10. Platform Leveling Override
A three position switch allows the
operator to adjust the automatic
self leveling system. This switch is
used to adjust platform level in sit-
uations such as
descending a grade.
11.
Platform Rotate
Provides rotation of the platform.
3-8
ascending/
12. Platform Overload
Indicates the platform has been over-
loaded.
13. Indicator Gauge
Registers the amount of time the machine
has been in use, with functions operating. In
the event of a fault, the hourmeter also dis-
plays the three digit fault code. Refer to the
Service Manual for a listing of fault codes. Additionally, there
is a small, red indicator light that will blink when there is a
fault on the machine to draw operator attention to the dis-
play.
14.
Machine Safety System Override (MSSO)
(CE Only)
Provides emergency override of function
controls that are locked out in the event of
Load Sense System activation.
31215000