Section 6. General Specifications & Operator Maintenance; Introduction; Operating Specifications - JLG 800A Operation And Safety Manual

SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1

INTRODUCTION

This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual - ANSI, CSA Spec3120740
Service and Maintenance Manual - CE Spec........... 3120858
Illustrated Parts Manual - ANSI, CSA Spec
Prior to S/N 0300069000....................................... 3120741
Illustrated Parts Manual - CE Spec
Prior to S/N 0300069000....................................... 3120859
Illustrated Parts Manual - ANSI, CSA Spec
S/N 0300069000 to Present.................................. 3121176
Illustrated Parts Manual - CE Spec
S/N 0300069000 to Present.................................. 3121854
3121209
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.2
– JLG Lift –

OPERATING SPECIFICATIONS

Table 6-1. Operating Specifications
Travel Speed
2WD
4WD
Gradeability
2WD
4WD
Turning Radius (Outside)
2WS
4WS
Turning Radius (Inside)
2WS
4WS
Overall Width
Machine Height Stowed
Machine Length (Stowed)
800A
800AJ
Wheel base
3.0 MPH (4.83 Km/hr.)
3.0 MPH (4.83 Km/hr.)
30%
45%
22 ft.- 6 in. (6.86 m)
14 ft.- 6 in. (4.42 m)
12 ft.- 0 in. (3.66 m)
11 ft.- 0 in. (2.13 m)
8 ft.-0 in. (2.44 m)
9 ft. 9.5 in.(2.98 m)
36 ft.-9 in. (11.25 m)
36 ft.-6 in. (11.13 m)
10 ft.- 0 in. (3.05 m)
6-1