Section 6 - General Specifications & Operator Maintenance; Introduction; Operating Specifications And Performance; Data - JLG 340AJ Operation And Safety Manual

6.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121259
Illustrated Parts Manual ................................................................3121260
3121258
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.2

OPERATING SPECIFICATIONS AND PERFORMANCE

DATA

Operating Specifications

Table 6-1. Operating Specifications
Capacity: Unrestricted:
ANSI
CE & Australia
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-3.
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-3.
Drive Speed - Stowed
Elevated Drive Speed
Gross Machine Weight - Approximate
ANSI
CE & Australia
– JLG Lift –
500 lbs. (227 kg)
500 lbs. (230 kg)
45%
5°
3.1 mph (5.0 kph)
0.6 mph (1.0 kph)
9400 lbs. (4263 kg)
9800 lbs. (4445 kg)
6-1