Section 6 - General Specifications & Operator Maintenance; Introduction; Operating Specifications - JLG E450A Operation And Safety Manual

6.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual ............................................3121648
Illustrated Parts Manual ................................................................3121649
3121647
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.2

OPERATING SPECIFICATIONS

Table 6-1. Operating Specifications
Maximum Work Load (Capacity)
ANSI Markets
Unrestricted:
Maximum Work Load (Capacity)
CE & Australia Markets
Unrestricted:
Travel Speed
Maximum Travel Grade (Gradeablility
Maximum Travel Grade (Side Slope)
Maximum Height: (stowed)
E450A
E450AJ/M450AJ
Maximum Horizontal Platform Reach
E450A
E450AJ/M450AJ
Turning Radius (Curb to Curb)
Turning Radius (inside)
– JLG Lift –
500 lb. (227 kg)
500 lb. (230 kg)
3.2 mph (5.2 kph)
30%
5°
6 ft. 6.25 in. (1.9 m)
6 ft. 7 in. (2.0 m)
23 ft. 1in.(7.0 m)
23 ft. 9 in. (7.24 m)
15 ft. 3 in. (4.65 m)
2 ft. (0.61 m)
6-1