Section 7 - General Specifications & Operator Maintenance; Introduction; Operating Specifications And Performance; Data - JLG 1850SJ Operation And Safety Manual

7.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121619
Illustrated Parts Manual ................................................................3121620
3121618
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.2

OPERATING SPECIFICATIONS AND PERFORMANCE

DATA

Operating Specifications

Table 7-1. Operating Specifications
Capacity - ANSI
Unrestricted
Restricted
Capacity - CE & Australia
Unrestricted
Restricted
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-3.
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-4.
Drive Speed
Drive Speed at Elevation
Gross Machine Weight - Approximate
– JLG Lift –
500 lbs (227 kg)
1000 lbs (454 kg)
500 lbs (230 kg)
1000 lbs (450 kg)
40%
5°
2.8 mph (4.5 kph)
0.3 mph (0.48 kph)
59,900 lb. (27170 kg.)
7-1