Section 6 - General Specifications & Operator Maintenance; Introduction; Operating Specifications - JLG 400S Operation Manual

6.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121671
Illustrated Parts Manual ................................................................3121672
3121670
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.2

OPERATING SPECIFICATIONS

Table 6-1. Operating Specifications - 400S
Maximum Work Load (Capacity):
Unrestricted (CE & Aus)
Untrestricted (ANSI)
Restricted (CE & Aus)
Restricted (ANSI)
Maximum Travel Grade, Stowed Position
(Gradeability)
Maximum Travel Grade, Stowed Position
(Side Slope)
Platform Height:
Horizontal Platform Reach:
Turning Radius (Outside)
Turning Radius (Inside)
Overall Width
Stowed Height
Stowed Length
– JLG Lift –
600 lb (270 kg)
600 lb (272 kg)
1000 lb (450 kg)
1000 lb (454 kg)
45%
5°
40 ft. 6 in. (12.36 m)
33 ft. 3 in. (10.13 m)
15 ft. 10.5 in. (4.8 m)
6 ft. 6 in. (2.0 m)
7 ft. 6.8 in. (2.3 m)
8 ft. 1.4 in. (2.47 m)
24 ft. 10.1 in. (7.57 m)
6-1