Show Network - GE PACSystems RX3i Command Line Interface Manual

2

show network

Global Command
This command displays Network Interface status and counters.
show network Command Format
show network
Example
In this example "lo0" is the internal loopback port; "gei0" is the internal network port.
> show network
device-name
01-JAN-2000
<<< Network Interface Status >>>
lo0 Link type:Local loopback
inet: 127.0.0.1
UP RUNNING LOOPBACK MULTICAST
MTU:1536 metric:1 VR:0 ifindex:1
RX packets:6 mcast:0 errors:0 dropped:1
TX packets:6 mcast:0 errors:0
collisions:0 unsupported proto:0
RX bytes:244 TX bytes:244
gei0 Link type:Ethernet
capabilities: TXCSUM TX6CSUM VLAN_MTU VLAN_TXHWTAG VLAN_RXHWTAG
inet 10.10.0.100
UP RUNNING SIMPLEX BROADCAST MULTICAST
MTU:1536 metric:1 VR:0 ifindex:2
RX packets:2390 mcast:1644 errors:0 dropped:0
TX packets:583 mcast:0 errors:0
collisions:0 unsupported proto:0
RX bytes:179k TX bytes:72k
device-name
>
PACSystems* RX3iPROFINET Controller Command Line Interface Manual – July 2011
2-42
05:44:17.0000
Queue:none
mask 255.255.255.255
Hwaddr 00:09:91:43:3b:61
mask 255.255.255.0
Screen Display
Queue:none
broadcast 10.10.0.255
show network
GFK-2572