GE PACSystems RX3i Command Line Interface Manual page 113

telnetd
Changing the Maximum Number of Telnet Connections
Step 1. Change the maximum connections.
device-name= telnetd 4
Max telnet Connections changed to 4
telnet changes will not take effect until next powerup or restart
device-name=
Step 2. Restart or power cycle the PNC. Use show telnet to display the Telnet status.
{Power-cycle occurs}
device-name> show telnet
01-JAN-2000 05:44:17.0000
<<< Telnet Info >>>
telnet Status:
Max telnet Connections:
Active telnet Connections:
device-name>
Disabling Telnet Connections
Step 1. Use no telnetd to disable all telnet connections.
device-name= no telnetd
telnet changes will not take effect until next powerup or restart
device-name=
Step 2. Restart or power cycle the PNC. Use show telnet to display the Telnet status.
{Power-cycle occurs}
device-name> show telnet
01-JAN-2000 05:44:17.0000
<<< Telnet Info >>>
telnet Status:
Max telnet Connections:
Active telnet Connections:
device-name>
GFK-2572
Screen Display
Screen Display
Enabled
4
1
Screen Display
Screen Display
Disabled
0
0
Chapter 3 Modify-Level Commands
3
3-21