GE PACSystems RX3i Command Line Interface Manual page 31

`
log
Fault Location Fields for Faults in Local Log Table
When displaying the detailed view of a fault on the PROFINET Controller, the Fault Location
field contents vary, depending on the exact type and location of the fault being logged. The
table below shows the possible fault locations along with the expected display formats.
Fault Location Format of Fault Location Field
PROFINET <Rack>.<Slot>
Controller
Profinet Device <Rack>.<Slot>.D<Device>
Profinet Module <Rack>.<Slot>.D<Device>.r
<RemoteRack>.s<RemoteSlot>
Profinet <Rack>.<Slot>.D<Device>.
Submodule r<Remote Rack>.
s<RemoteSlot>.
ss<RemoteSubslot>
Profinet <Rack>.<Slot>.D<Device>.
Interface r<RemoteRack>. s<RemoteSlot>.
i<Interface>
Profinet <Rack>.<Slot>.D<Device>.
Interface Port r<RemoteRack>.
s<RemoteSlot>.i<Interface>.
p<Port>
GFK-2572 Chapter 2 Monitor Level Commands
Description
PROFINET Controller in rack #<Rack> and slot
#<Slot> logged its own fault.
PROFINET Controller in rack #<Rack> and slot
#<Slot> logged a fault for Profinet Device
#<Device>.
PROFINET Controller in rack #<Rack> and slot
#<Slot> logged a fault for the module located in
rack #<RemoteRack> and slot #<RemoteSlot> of
Profinet IO Device #<Device>.
PROFINET Controller in rack #<Rack> and slot
#<Slot> logged a fault for the sub-module located
in rack #<RemoteRack>, slot #<RemoteSlot>,
and subslot #<RemoteSubslot> of Profinet IO
Device #<Device>.
PROFINET Controller in rack #<Rack> and slot
#<Slot> logged a fault for the interface in rack
#<RemoteRack>, slot #<RemoteSlot>, and
interface #<Interface> of Profinet IO Device
#<Device>.
PROFINET Controller in rack #<Rack> and slot
#<Slot> logged a fault for the interface port in
rack #<RemoteRack>, slot #<RemoteSlot>,
interface #<Interface>, and port #<Port> of
Profinet IO Device #<Device>.
2
2-15