GE PACSystems RX3i Command Line Interface Manual page 94

3
Example of Changing Access Level
Initial display:
device-name>
Enter the login command to enter Modify Access Level using the admin user name and
password (this is an example only; the password does not actually appear):
device-name>
device-name> login
Login:admin
Password:system
device-name=
Enter ? to view the available non-global commands in Modify level:
device-name= ?
arp
clear
default
login
loginCfg
logout
[no] monport
ping
restart
sessionTimeout
shConfig
[no] telnetd
time
PACSystems* RX3i PROFINET Controller Command Line Interface Manual – July 2011
3-2
- Show ARP Table
- clear ARP, counters, log, STAT LED.
- Return module to factory default values.
- Enter higher Access Level
- Set login parameters such as password
- Return to Monitor Access Level
- Specify the monitor port/ports to be monitored
- Send ICMP Echo requests.
- Restart the IO LAN module firmware
- Sets/Displays session inactivity timeout
- Set/Show Shell settings
- Enables/Disables telnet server.
- Change the internal IO LAN clock.
arp
GFK-2572