Terminate - GE PACSystems RX3i Command Line Interface Manual

`

terminate

terminate
Global Command
This command ends the Command Line Interface session. When the session ends, terminal
session parameters (for example, terminal row/column settings) are not saved.
Note: In HyperTerminal, the session does not close after executing the terminate command.
To re-establish the connection it may be necessary to disconnect and reconnect the
HyperTerminal application and press the Enter key.
terminate Command Format
terminate
Example
device-name> terminate
01-JAN-2000 05:44:17.0000
Command Shell Session Terminated
GFK-2572
Screen Display
Chapter 2 Monitor Level Commands
2
2-75