3
loginCfg
Non-Global Command
This command changes the Modify Access level login password.
Passwords are case-sensitive. The following characters are allowed for passwords: Any
alphanumeric character and in addition:
` ~ @ ^
&
* _
Passwords must be between 4 and 10 characters.
loginCfg password
loginCfg default
loginCfg Command Format
loginCfg [default | password]
loginCfg password Parameters
<oldPassword>
<newPassword>
Examples
Returning the Modify Access Level Password to its Default Value
device-name= loginCfg default
login password changed to default
device-name=
Changing the Modify Access Level Password
device-name= loginCfg password
Enter the existing Password : system
Enter the new Password : ge123
Confirm the new password : ge123
Modify level login password changed
device-name=
PACSystems* RX3i PROFINET Controller Command Line Interface Manual – July 2011
3-12
-
+ = { } [
] \ /
prompts to set new Modify access level.
returns the Modify access level password to its default value.
Specifies the current password that will be replaced with the
newPassword. If the oldPassword value does not equal the current
password, the command returns an error.logincfg
Specifies the new password to replace the current password.
Screen Display
Screen Display
; : < , (comma) . (period)
loginCfg
GFK-2572