GE PACSystems RX3i Command Line Interface Manual page 85

`
show sm
Shared Memory Interface Counter Definitions
The following table provides a description of each Shared Memory Interface counter.
Counter
IcRqRset
"Slave hard reset request" interrupt commands sent.
IcHIPmsg
"High priority message waiting" interrupt commands sent.
IcLOPmsg
"Low priority message waiting" interrupt commands sent.
IcTstInt
"Test" interrupt commands sent.
IcSftRst
"Slave soft reset request" interrupt commands sent.
IcMIntIn Shared memory interrupts received.
IoScanPD Input I/O data productions.
HpRlbSlv Released slave shared memory heap blocks.
HpRlbMst Released master shared memory heap blocks.
HpBBound Shared memory heap block boundary errors.
HpBogSlv Duplicate frees of slave shared memory heap blocks.
HpBogMst Duplicate frees of master shared memory heap blocks.
HpRsvBad Shared memory heap full errors.
MbLoQput Low priority mail sent to PLC.
MbHiQput High priority mail sent to PLC.
MbLoQget Low priority mail received from PLC.
MbHiQget High priority mail received from PLC.
GFK-2572 Chapter 2 Monitor Level Commands
Description
2
2-69