Show Config - GE PACSystems RX3i Command Line Interface Manual

`

show config

show config
Global Command
Entering show config or show config all displays Device Name, ip parameters (IP Address,
subnet mask, default gateway), redundant media role (disabled, client, manager), ring port
assignment, ring test interval, and ring test retries. Entering individual parameter names
displays the specified parameters. For example, show config deviceName displays just the
PROFINET Device Name.
show config Command Format
show config [all | deviceName | ip | rdnMedia]
Examples
Displaying the PNC Configuration
> show config
device-name
Src Parameter
---- ---------------- --------------------------------------------------
PME Device Name
IP
PME IP Address
PME Subnet Mask
PME Default Gateway
Media Redundancy
PME Role
PME Ring Port 1
PME Ring Port 2
PME Test Interval
PME Monitor Count
device-name>
GFK-2572
Screen Display
Parameter Value
myDevice
10.10.0.2
255.255.255.0
0.0.0.0
Client
1
2
20 ms
3
Chapter 2 Monitor Level Commands
2
2-23