Sessiontimeout - GE PACSystems RX3i Command Line Interface Manual

sessionTimeout

sessionTimeout
Global Command
This command sets or displays the session inactivity timeout value for the current Command
Line Interface session. Entering the command without the newTimeout parameter displays the
current timeout setting.
sessionTimeout Command Format
sessionTimeout <newTimeout>
<newTimeout>
Examples
Changing the Session Timeout Value
device-name= sessionTimeout 900
Session Inactivity Timeout Set To 900 seconds
device-name=
Displaying the Session Timeout Value
device-name= sessionTimeout
Session Inactivity Timeout:
device-name=
GFK-2572
Specifies the new session inactivity timeout value in seconds. It
determines the amount of time the Command Line Interface session can
remain inactive (no keyboard input) before closing the session. The
default value is 600 seconds (10 minutes). Values between 1 and
604,800 (1 week) inclusive are valid.
Screen Display
Screen Display
900 seconds
Chapter 3 Modify-Level Commands
3
3-19