Directives; Notes On Electromagnetic Compatibility (Emc) - Siemens SINAMICS S120 Combi Equipment Manual

12.3

Directives

The product satisfies the protection targets of the following EU Directives applicable within
the European Economic Area (EEA):
Table 12- 1
Directive
2006/95/EC
2004/108/EC
12.4

Notes on electromagnetic compatibility (EMC)

Requirements to implement EMC are listed in EN 61000-6-2, EN 61000-6-4, EN 61800-3,
EN 60204-1 and in the "EMC installation guideline" Configuration Manual (Article No.
6FC5297-0AD30-0☐P☐). Conformance with the EMC Directive of the EC can be ensured by
following the measures described in the Configuration Manual, EMC installation guideline.
When mounting components in cabinets, in order to fulfill the EMC Directive, the following
conditions must be additionally observed:
● Connected to TN and TT line supplies with grounded neutral point and grounded phase
conductor as well as to IT line supplies.
● Observance of information about cable shielding and equipotential bonding.
● Use of the recommended power and signal cables from Siemens.
● Only cables from Siemens may be used for DRIVE-CLiQ connections.
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
Directives
Description
Directive of the European Parliament and Council of December 12, 2006, on
the approximation of the laws of the member states relating to electrical
equipment designed for use within certain voltage limits (Low-Voltage Di-
rective).
Directive of the European Parliament and Council of December 15, 2004,
which repeals directive 89/336/EEC, on the approximation of laws of the
member states relating to electromagnetic compatibility (EMC Directive).
Cabinet design and EMC
12.3 Directives
289