Siemens SINAMICS S120 Combi Equipment Manual page 283

Installation
1. Insert the DRIVE CLiQ cabinet bushing from the outside of the control cabinet through the
cutout in the control cabinet.
2. Attach the DRIVE-CLiQ cabinet bushing to the outer control cabinet panel using 2 M3
screws and 2 nuts. In order to ensure good electromagnetic compatibility, a good
electrical connection must be established between the DRIVE-CLiQ cabinet gland and
the cabinet panel over a large surface area.
①
②
③
Figure 11-6
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
Control cabinet panel
M3 screw, tightening torque 0.8 Nm
DRIVE-CLiQ cabinet bushing
Installing the DRIVE-CLiQ cabinet bushing for cables with DRIVE-CLiQ connectors
Accessories
11.1 DRIVE-CLiQ cabinet bushing
283