X524 Electronics Power Supply; X500-X505 Drive-Cliq Interfaces - Siemens SINAMICS S120 Combi Equipment Manual

9.2.3.2

X524 Electronics power supply

Table 9- 16 Terminals for the electronics power supply
Terminal
+
+
M
M
The maximum cable length that can be connected is 10 m.
Note
The two "+" and "M" terminals are jumpered in the connector. This ensures that the supply
voltage is looped through.
The current consumption increases by the value for the DRIVE-CLiQ participants.
9.2.3.3

X500-X505 DRIVE-CLiQ interfaces

Table 9- 17
Connector
type
The blanking covers for the DRIVE-CLiQ interfaces are included in the scope of delivery.
Blanking covers (50 x) Article No.: 6SL3066-4CA00-0AA0
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
Designation
Electronics power supply
Electronics power supply
Electronics ground
Electronics ground
X500-X505: DRIVE-CLiQ interfaces
Pin Signal name
1 TXP
2 TXN
3 RXP
4 Reserved, do not use
5 Reserved, do not use
6 RXN
7 Reserved, do not use
8 Reserved, do not use
A + (24 V)
B M (0 V)
DRIVE-CLiQ socket
Additional system components
9.2 DRIVE-CLiQ Hub Module DMC20
Technical data
Voltage: 24 V DC (20.4 ... 28.8 V)
Current consumption: max. 0.5 A
Max. current via jumper in connector: 20 A (15 A ac-
cording to UL/CSA)
Type: Screw terminal 3 (Page 307)
Max. connectable cross-section: 2.5 mm
Tightening torque: 0.4 ... 0.5 Nm
Technical data
Transmit data +
Transmit data -
Receive data +
Receive data -
Power supply
Electronics ground
2
225