12.6
24 V DC supply
12.6.1
General information
The 24 V DC voltage is required to supply the
1. electronics of the S120 Combi and the expansion axes (Motor Modules) via the integrated
24 V busbar
2. Electronics of the SINUMERIK 828D PPU, the Sensor Modules, the Terminal Module, the
Braking Module, the DMx as well as the process voltage of its digital inputs
3. Load voltage of the digital outputs
4. Motor holding brake
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
Cabinet design and EMC
12.6 24 V DC supply
293