Installation - Siemens SINAMICS S120 Combi Equipment Manual

Hide thumbs Also See for SINAMICS S120 Combi:

Table of Contents

Installation

Contact surface

Figure 10-21 Drilling pattern for installing the SME20/SME25

Installation

1. Place the drilling pattern on the mounting surface. Make sure that the contact surface is

bare, unpainted metal.

2. Drill two holes with Ø 5.3 or M5 threaded holes according to the drilling pattern.

3. Fix the Sensor Module to the mounting surface. The tightening torque is 6 Nm.

SINAMICS S120 Combi

Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5

Encoder system connection

10.4 Sensor Module External SME25